Skip to content

Choosing CE marking software: nine questions and our answers

You can test CE marking software for machinery against nine questions: legal bases and the cut-over date of 20 January 2027, origin and currency of the standards data, standards texts, changes to standards, the role of the AI, technical responsibility, export of your data, team size and cost over the term. The checklist works for any software; for each question this page also gives CE-Copilot's answer as of November 2026, so that you can put it next to other offers.

For each question: why it matters, what to look for and how CE-Copilot does it. At the end of the page the nine questions are listed as a checklist to tick off.

Nine questions for choosing CE marking software

  1. 2. Where does the standards data come from, and how current is it?

    The presumption of conformity of a harmonised standard depends on its reference in the Official Journal of the EU, and these lists change several times a year. An outdated list of standards leads to declarations citing withdrawn editions or missed transition periods.

    What to look for

    • Does the standards data come from the lists of references in the Official Journal of the EU, and is the date of the data visible?
    • How often is it synchronised, and are withdrawn editions and transition periods shown?
    • Are standards without a presumption of conformity, such as national rules, marked as such?

    How CE-Copilot does it (as of November 2026)

    The standards database is based on 12 lists of references of harmonised standards in the Official Journal of the EU and is synchronised with them automatically every week; decisions already published in the Official Journal but still missing from the lists are added with an official reference. It holds more than 3,600 entries including withdrawn editions, of which more than 2,300 are currently harmonised (as of September 2026). Relevant German-speaking rules such as DGUV regulations, DIN VDE and TRBS are included and expressly marked as rules without a presumption of conformity.

    No references of harmonised standards have been published under the Machinery Regulation so far (as of November 2026). The standards analysis of a project under the Machinery Regulation points out that there is therefore no presumption of conformity under the Regulation; CE-Copilot adopts the first list after review.

    More: Standards finder, Harmonised standards for machinery.

  2. 3. Can I read the texts of the standards in the software?

    The full texts of standards are protected by copyright and licensed by the standards publishers, usually per standard or by subscription. To plan the cost, you need to know whether a software includes full texts or only the information about the standards.

    What to look for

    • Are full texts of standards included, and if so, under which licence?
    • Can you store standards you have bought yourself, without them going into an AI or a third-party database?

    How CE-Copilot does it (as of November 2026)

    No, CE-Copilot does not include full texts of standards. The software shows the information you need for CE marking: harmonisation status, edition, transition periods, the reference in the Official Journal and the link to your machine. That way you know which standards you really need before you buy them.

    From the Professional plan you can store standards you have licensed yourself as PDFs under “My standard texts”. The files stay private in your account, do not go into the standards database, and the AI does not analyse them. Whether your licence allows storage in a cloud application is something to clarify with your standards supplier.

    More: Standards checklist.

  3. 4. What happens when a standard changes?

    New editions, amendments and withdrawals of harmonised standards also affect machines you continue to build in series; the Machinery Regulation requires such changes to be adequately taken into account (Article 10(4)). What matters is that you find out in time and know which projects are affected.

    What to look for

    • Does the software report new editions, withdrawals and the end of the presumption of conformity, by email if you wish?
    • Does the alert show the affected projects, and is it kept as evidence?
    • Is it clearly stated which assessment remains with you?

    How CE-Copilot does it (as of November 2026)

    You subscribe to standards in the standards change tracker, from the standards finder with one click: up to 10 standards on Starter, up to 50 on Professional, unlimited on Business. On a new edition or a withdrawal an alert appears with the affected projects, by email as well if you wish; before the presumption of conformity ends, the tracker warns 90, 30 and 7 days ahead. All alerts remain visible in the history. Before export, the check of the declaration of conformity reports withdrawn standards.

    What has changed in content between two editions, and whether your machine, the risk assessment or only the documents need to be adapted, is your assessment. CE-Copilot does not compare the texts of two editions of a standard.

    More: Standards change tracker, CE compliance management.

  4. 5. What does the AI do, on what basis, and how do I check its suggestions?

    AI functions shorten research and writing, but they can also produce plausible errors, such as standard numbers that do not exist. For your documents, what counts is whether you can see, check and trace every suggestion before it goes into a document.

    What to look for

    • Do you see every AI suggestion before it is applied, and can you change or discard it?
    • Are standard numbers and references checked against a database instead of being generated freely?
    • Is your data used for training, and is there a data processing agreement?

    How CE-Copilot does it (as of November 2026)

    The AI (Claude by Anthropic) is built into the software. It suggests directives, standards, hazards, protective measures and chapter texts of the operating instructions, and it checks the declaration of conformity. Every suggestion is shown before it is applied and can be accepted, changed or discarded.

    The AI selects standards only from the database: number, title, type of standard and harmonisation status come from the database, and a number that cannot be found there appears as “to be reviewed” instead of as a valid standard. Hazards from AI suggestions are marked in the risk assessment export, and exports carry an AI disclosure. Only the content a given step needs is sent to the AI; Anthropic does not use it for training, and a data processing agreement is available on request in every plan. The technical review and the approval lie with the manufacturer.

    More: Trust Center, Risk assessment software.

  5. 6. Who is technically responsible for the templates and the legal implementation?

    The templates and checks of a CE marking software turn legal texts into workflows; an error in them carries over into every project. Check who is responsible for the implementation and how traceably it is documented.

    What to look for

    • Is it stated who is technically responsible for the implementation, with qualifications?
    • Are the legal status and changes dated and backed by sources?
    • Are certificates or test marks mentioned, and what exactly do they cover?

    How CE-Copilot does it (as of November 2026)

    CE-Copilot is software from SH Engineering. It is technically led by Hünkar Sönmez, mechanical engineer (B.Eng.) with professional experience in industrial automation; he also writes the guides on this website, each of them dated. Structure and templates follow the Machinery Directive, the Machinery Regulation, EN ISO 12100 and EN ISO 13849-1; we check legal statements against the official texts from EUR-Lex.

    What the software can do and since when is listed with dates in the news (since July 2026). Reviews from users are on OMR Reviews. CE-Copilot is not a notified body and does not issue certificates; we do not hold a test mark or certificate for the software itself, and what is available on data processing and security is set out in the Trust Center. Responsibility for conformity remains with the manufacturer.

    More: About CE-Copilot and SH Engineering, News, OMR Reviews.

  6. 7. Can I get all my data out again at any time?

    You must keep the technical documentation and the declaration of conformity for at least ten years and present them on request, often longer than a software contract runs. Your documents should therefore remain usable independently of the software and of the vendor.

    What to look for

    • Can all documents and data be exported in common formats (Word, PDF, Excel, JSON) without the vendor's involvement?
    • What happens to access and data after the contract ends, and which notice periods apply?
    • Does your ten-year retention depend on the software continuing to exist, or are the approved versions in your own archive?

    How CE-Copilot does it (as of November 2026)

    Yes, without our involvement. From the Starter plan you export the documents individually as PDF and Word, the whole project as a complete dossier in PDF and Word, and the technical documentation with all uploaded files as a ZIP archive with a SHA-256 checksum per file. From Professional, the project data is also available as an Excel workbook and as a JSON project file that can be read in again. A data export with all your data as JSON is available in the settings in every plan. The content remains your property (section 12 of the terms), and the exported documents open without CE-Copilot, the Word files can also be edited.

    You can cancel the monthly plan with 14 days' notice to the end of the billing period, the 3-month licence and the annual plan with one month's notice to the end of the term; on the 3-year plan ordinary cancellation is excluded during the 36 months. After the contract ends, access is not blocked but converted into a read-only archive in which you can still view and download projects and documents. The terms reserve a small fee for this archive, announced at least four weeks in advance; export and your right to request deletion of the account are not affected (section 7 of the terms).

    Our advice applies to any software: keep every approved version as PDF and Word in your own archive. Then retention over ten years depends on your archive, not on a vendor continuing to exist.

    More: Sample dossier (example of a complete export), Terms and conditions, Trust Center.

  7. 8. Does the software fit the size of my team?

    When design, documentation and CE officers work together, the number of users, roles and a record of who changed what all count. If you build product lines, you also need templates so that variants do not start from scratch every time.

    What to look for

    • How many users can work at the same time, with which roles, and is there an audit trail?
    • Can projects be created from templates for variants and product lines?
    • How many active projects are included, and what do additional users cost?

    How CE-Copilot does it (as of November 2026)

    CE-Copilot is designed for single users and teams. Starter and Professional each have one user profile (Professional with 2 concurrent sessions). Business has 5 user profiles with the roles admin, editor and read-only, pooled AI allowances and an audit trail of all changes with CSV export. Enterprise is intended for more than 5 user profiles, scaled to your needs, price on request.

    Active projects: Starter 5, Professional 20, Business unlimited, plus a read-only archive. For product lines you create projects from templates, and recurring assemblies are assessed once as building blocks, both from Starter; hazards taken over are marked “to be reviewed”.

    More: CE software by audience, Building blocks (in German).

  8. 9. What does it cost over the term, and what is not included?

    Software prices are hard to compare: net or final price, term, add-on modules and allowances differ. On top of that come costs that no software covers, such as standards texts and, where required, a notified body.

    What to look for

    • Are the prices final prices or net, and which terms and notice periods apply?
    • Which modules, allowances and services cost extra?
    • What does the software expressly not do?

    How CE-Copilot does it (as of November 2026)

    Starter costs €99 per month on the annual plan, €119 with the 3-month licence and €155 on the monthly plan. Professional costs €199, €229 or €298, Business €359, €399 or €519 per month; all prices are final prices, Enterprise on request. If you pay 36 months in advance, you choose the 3-year plan; it renews for a further 36 months unless cancelled. You can try it free for 14 days with the Starter scope and up to 2 projects, without a credit card.

    From Professional, the operating instructions in dialogue can be added as a one-time purchase per project (€12.99); the AI allowances per plan are on the pricing page. Not included are full texts of standards, the calculation of the achieved performance level (that is done in SISTEMA; you determine the required PLr in CE-Copilot with the risk graph), an on-premise installation, interfaces to CAD, PLM or ERP (in the Enterprise plan as custom development by agreement) and any certification: CE-Copilot does not replace a notified body.

    More: Pricing, CE marking costs.

Summary: the nine questions to tick off

To print and to take into the conversation with any vendor:

  • Which legal acts does the software cover, and how does it handle the cut-over date of 20 January 2027?
  • Where does the standards data come from, and how current is it?
  • Can I read the texts of the standards in the software?
  • What happens when a standard changes?
  • What does the AI do, on what basis, and how do I check its suggestions?
  • Who is technically responsible for the templates and the legal implementation?
  • Can I get all my data out again at any time?
  • Does the software fit the size of my team?
  • What does it cost over the term, and what is not included?

Test CE-Copilot against the nine questions yourself

Free for 14 days with the Starter scope, without a credit card. The sample dossier shows what a complete export looks like, without registration. Licence for three months at a time, paid in advance; monthly subscription at a higher price, no mandatory annual subscription.

FAQ

Frequently asked questions about choosing CE marking software

What should I look for when choosing CE marking software?
Nine points: which legal acts the software covers and how it handles the cut-over date of 20 January 2027, where the standards data comes from and how current it is, whether standards texts are included, how changes to standards are reported, what the AI does and how you check its suggestions, who is technically responsible for templates and legal implementation, whether you can get all your data out without the vendor's involvement, whether the number of users, roles and templates fit your team, and what the software costs over the term and does not include. The checklist at the end of this page sums up the checks.
Which manufacturers is CE-Copilot suitable for?
For manufacturers of machinery and partly completed machinery who prepare their CE documents themselves, from single users to teams: Starter for one person, Business with 5 user profiles, roles and an audit trail, Enterprise for more than 5 user profiles. For series machinery and product lines there are projects from templates and building blocks for recurring assemblies, for modifications the substantial modification check, and for the time after placing on the market the standards change tracker. CE-Copilot is not intended for medical devices, toys or construction products.
Can I take my data with me if I switch software?
Yes. In CE-Copilot you export each document as PDF and Word, the project as a complete dossier and the technical documentation with all attachments as a ZIP archive, and from Professional also the project data as Excel and JSON; a data export with all data as JSON is available in every plan. You do not need our involvement for this. After the contract ends, your access remains as a read-only archive with download (section 7 of the terms), and the content remains your property (section 12).
Does CE marking software replace a CE consultant or the notified body?
No. CE marking software replaces tools such as templates, lists and research, not expert judgement: assessment, approval and signature remain with the manufacturer. Where the law requires a notified body, for example for certain machinery under Annex IV of the Machinery Directive or Annex I of the Machinery Regulation, it is still needed. When a service provider pays off and how both can be combined is covered in the guide “Outsource CE documentation or do it yourself with software?”.

Technical information as of 18 November 2026, not legal advice. Statements about CE-Copilot checked against the functions of the application, the price list, the terms and conditions and the Trust Center as of the same date. AI suggestions in CE-Copilot are drafts; responsibility for conformity remains with the manufacturer.

More guides